PNT的锂电池极片分切机,因在100m/min的速度时也没震动,使用2~8Kgf以下的低张力下,可保障稳定地分切工作,是最适合进行极片分切的设备。
在分切机上可配套在线检测机和高速自动标签机。 (速度 : 60m/min/±25mm).分切时的毛刺仅10微米以内,也可适用对没涂布的部分分切。
项目 | 规格 |
---|---|
基材 | 铝箔或铜箔 |
厚度 | 8㎛ ~ 30㎛ |
极片厚度 | 80㎛ ~ 250㎛ |
基材宽度 | Max. 1,280mm |
辊长 | Max. 1,500mm |
分切宽度 | 30mm ~ 210mm |
机速 | Max. 100m/min |
分切系统 | 剪刀帮系统 (刀框系统) |
放卷径 | Max. 750mm |
收卷径 | Max.450mm |
收卷系统 | 中心收卷 (接近间隙和接触式) |
PNT's battery slitter is suitable for electrode coated metal foil machining.
Max 670mm of foil width is available and 2 ~ 8Kgf of tension is applicable at the Max speed of 80m/min.
Only little vibration is generated during even high speed operation.
When slitting, burr can be maintained within 10 micron. Especially, pnt has knowhow for slitting non-coated part.
In addition, vision & high speed label System (Speed : 60m/min/±25mm) can be installed with this slitting machine, according to customer requests.
Description | General specification |
---|---|
Web Material | Al or Cu Foil |
Foil Thickness | 8㎛ ~ 30㎛ |
Electrode Thickness | 80㎛ ~ 250㎛ |
Foil Width | Max. 1,280mm |
Roll Width | Max. 1,500mm |
Slitting Width | 30mm ~ 210mm |
Mechanical Speed | Max. 100m/min |
Slitting System | Shear Gang Knife System (Block Knife System) |
Unwind Diameter | Max. 750mm |
Rewind Diameter | Max.450mm |
Winding System | Center winding (Gap &Touch, Near Type) |