PNT的锂电池极片涂布机适用了狭缝式(Slot Die)涂布,涂布精度和均匀性良好。
并采用气浮式和导辊式烘箱,不仅烘箱尺寸小、而且干燥效果好、发挥高运行速度。
项目 | 规格 |
---|---|
基材 | 正极 : 铝箔 负极 : 铜箔 |
厚度 | 正极 : 12 ~ 30㎛ 负极 : 8 ~ 30㎛ |
宽度 | Max. 1,280mm |
辊长 | Max. 1,500mm |
机速 | Max. 70m/min |
放卷径 | 700mm |
收卷径 | 900mm |
涂布方式 | 狭缝式(Slot Die ) |
涂布形式 | 间隔及条纹 |
烘箱 | 气浮式及导辊传片式 |
收卷方式 | 中心收卷 |
PNT's Lithium Ion Battery coating machine can control coating thickness more accurately and uniformly by using slot die coating system.
In addition, by applying air floating & roll supporting type to drying unit, it can coat stably and fast.
This machine also can control the slot die lip by receiving feed back from a densimeter.
Description | General specification |
---|---|
Web Material | Al Foil Cu Foil |
Web Thickness | AL: 12 ~ 30㎛Cu: 8 ~ 30㎛ |
Web Width | Max. 1,280mm |
Roll Width | Max. 1,500mm |
Coating Width | Max. 70m/min |
Unwind Diameter | 700mm |
Rewind Diameter | 900mm |
Coating System | Slot Die Coating System |
Coating Method | Intermittence & Stripe |
Dryer Type | Air Floating &Roll Supporting Type |
Winding System | Center Winding System |